图片展示
Get a quote

Product Category

  2. Home
  3. >
  4. Wheel Loader Parts
  5. >
  6. Side gear 275102466 XCMG ZL50GNSide gear 275102466 XCMG ZL50GN
  • Product
  • Product Detail
Side gear 275102466 XCMG ZL50GNSide gear 275102466 XCMG ZL50GN

Side gear 275102466 XCMG ZL50GNSide gear 275102466 XCMG ZL50GN

Side gear 275102466 XCMG ZL50GNSide gear 275102466 XCMG ZL50GN

Select the number of specifications

Please check the product information you want!

Product Detail

Product Description – XCMG Side Gear 275102466 for ZL50GN Loader

The XCMG Side Gear 275102466 have genuine OEM differential component manufactured specifically for the XCMG ZL50GN wheel loader drive axle. This side gear (also referred to as a differential side gear or axle shaft drive gear) is a precision‑engineered, case‑hardened steel gear that meshes with the differential pinion gears (spider gears) inside the differential carrier. Its primary function is to transfer rotational torque from the differential case to the left or right axle shaft, while allowing the two drive wheels to rotate at different speeds during cornering or when traction varies between wheels – a critical requirement for loader maneuverability in tight construction sites, quarries, and material handling yards.

Manufactured from high‑quality alloy steel (typically 20CrMnTi or equivalent) and subjected to carburizing, quenching, and tempering heat treatment, the 275102466 side gear achieves a surface hardness of 58–62 HRC with a tough, ductile core. This metallurgical profile provides exceptional resistance to pitting, tooth breakage, and wear under the extreme shock loads, high torque spikes, and cyclic stresses encountered during bucket loading, aggressive digging, and travel over uneven terrain. The gear teeth are precision hobbed and ground to exacting tolerances (ISO class 6 or better) to ensure smooth meshing, low noise, and efficient power transfer. The internal spline bore is broached to match the corresponding axle shaft spline (typically 40 mm or similar, depending on the ZL50GN axle configuration), providing a secure, backlash‑free torque transmission.

The side gear 275102466 is a direct replacement for the original factory part in the XCMG ZL50GN drive axle (both front and rear axles, left and right sides). When installed together with new pinion gears, thrust washers, and cross shaft, it restores proper differential function, eliminates gear whine or clunking, prevents uneven tire wear, and avoids differential lock‑up or axle failure. Routine inspection of side gears is recommended during axle overhauls or whenever differential noise becomes apparent. Using an authentic XCMG side gear guarantees correct tooth profile, spline fitment, material grade, and heat treatment – essential for maintaining the ZL50GN's rated axle load capacity and operational reliability.

Applications: XCMG ZL50GN wheel loader – front and rear drive axles (differential assembly). May also fit other XCMG ZL50 series loaders (ZL50G, ZL50C) and LW500KL variants with the same axle architecture – always verify with original part number and axle serial number.

XCMG Side Gear 275102466 – Related Parts Cross‑Reference Table (ZL50GN Series)

Part No.Description / FunctionApplicable Model(s) / Remarks
275102466Side gear (differential side gear, axle shaft drive gear)XCMG ZL50GN drive axle
275102467Side gear (opposite side or alternative fitment)XCMG ZL50GN / ZL50G
275102468Differential pinion gear / spider gear (straight bevel)XCMG ZL50GN differential assembly
275102469Differential cross shaft / spider shaft (pinion shaft)XCMG ZL50GN differential
275102470Differential thrust washer (side gear backing washer)XCMG ZL50GN – sits behind side gear
275102471Differential pinion thrust washerXCMG ZL50GN – between pinion and case
275102472Differential case (left half)XCMG ZL50GN differential housing
275102473Differential case (right half)XCMG ZL50GN differential housing
275102474Differential bearing cone (tapered roller bearing inner)XCMG ZL50GN axle – differential carrier
275102475Differential bearing cup (tapered roller bearing outer)XCMG ZL50GN axle
275102476Axle shaft (left side, splined)XCMG ZL50GN – spline mates with 275102466
275102477Axle shaft (right side, splined)XCMG ZL50GN
275102478Axle shaft seal (hub end)XCMG ZL50GN
275102479Wheel bearing cone (inner, tapered roller)XCMG ZL50GN front/rear hub
275102480Wheel bearing cone (outer, tapered roller)XCMG ZL50GN front/rear hub
253100958Middle transmission shaft (propeller shaft)XCMG ZL50GN driveline
253100955Front transmission shaftXCMG ZL50GN
253100956Rear transmission shaftXCMG ZL50GN
252900594Universal joint cross bearing (spider)XCMG ZL50GN – for transmission shafts
800901160Brake valve (air‑over‑hydraulic)XCMG ZL50GN braking system
803069452Check valve assembly (hydraulic one‑way)XCMG ZL50GN hydraulic circuit
860166494Hydraulic combination switchXCMG ZL50GN (if equipped)
803004342Left lift cylinderXCMG ZL50GN front attachment
803004343Right lift cylinderXCMG ZL50GN front attachment
803596239Condenser assembly (A/C system)XCMG ZL50GN cabin (air conditioning)
860110632Fuel‑water separator combination valveXCMG ZL50GN fuel system
803502420Oil temperature sensorXCMG ZL50GN with Weichai engine
803502505Oil pressure sensorXCMG ZL50GN
803502461Air pressure sensorXCMG ZL50GN (brake system)
250100115Coolant temperature sensorXCMG ZL50GN engine
252908640Parking brake bracketXCMG ZL50GN chassis
805000278Bolt (M10×55, GB/T5783‑2000)XCMG ZL50GN – differential case bolts
805300017Spring washer (10, GB/T97.1‑2002)XCMG ZL50GN – fastener
805004763Bolt (M10×25, Dacromet)XCMG ZL50GN – mounting hardware
803199324Ferrule (Φ14 TJBC)XCMG ZL50GN – front axle oil line
252918385Hose assembly (hydraulic)XCMG ZL50GN – brake / steering circuit
803171569Hydraulic fitting / connectorXCMG ZL50GN
803164726Hydraulic fitting / connectorXCMG ZL50GN – hand brake unit
275102481Differential pinion gear set (complete, 4 pcs)XCMG ZL50GN – alternative kit
275102482Side gear thrust washer set (2 pcs)XCMG ZL50GN – replacement shims
275102483Differential bearing adjusting shim setXCMG ZL50GN – for backlash setting
275102484Axle shaft spacer ringXCMG ZL50GN
275102485Axle shaft retaining ring / circlipXCMG ZL50GN
800511365Spherical plain bearing GE30ESXCMG ZL50GN – standard component reference


No comment

Product Detail

Product Description – XCMG Side Gear 275102466 for ZL50GN Loader

The XCMG Side Gear 275102466 have genuine OEM differential component manufactured specifically for the XCMG ZL50GN wheel loader drive axle. This side gear (also referred to as a differential side gear or axle shaft drive gear) is a precision‑engineered, case‑hardened steel gear that meshes with the differential pinion gears (spider gears) inside the differential carrier. Its primary function is to transfer rotational torque from the differential case to the left or right axle shaft, while allowing the two drive wheels to rotate at different speeds during cornering or when traction varies between wheels – a critical requirement for loader maneuverability in tight construction sites, quarries, and material handling yards.

Manufactured from high‑quality alloy steel (typically 20CrMnTi or equivalent) and subjected to carburizing, quenching, and tempering heat treatment, the 275102466 side gear achieves a surface hardness of 58–62 HRC with a tough, ductile core. This metallurgical profile provides exceptional resistance to pitting, tooth breakage, and wear under the extreme shock loads, high torque spikes, and cyclic stresses encountered during bucket loading, aggressive digging, and travel over uneven terrain. The gear teeth are precision hobbed and ground to exacting tolerances (ISO class 6 or better) to ensure smooth meshing, low noise, and efficient power transfer. The internal spline bore is broached to match the corresponding axle shaft spline (typically 40 mm or similar, depending on the ZL50GN axle configuration), providing a secure, backlash‑free torque transmission.

The side gear 275102466 is a direct replacement for the original factory part in the XCMG ZL50GN drive axle (both front and rear axles, left and right sides). When installed together with new pinion gears, thrust washers, and cross shaft, it restores proper differential function, eliminates gear whine or clunking, prevents uneven tire wear, and avoids differential lock‑up or axle failure. Routine inspection of side gears is recommended during axle overhauls or whenever differential noise becomes apparent. Using an authentic XCMG side gear guarantees correct tooth profile, spline fitment, material grade, and heat treatment – essential for maintaining the ZL50GN's rated axle load capacity and operational reliability.

Applications: XCMG ZL50GN wheel loader – front and rear drive axles (differential assembly). May also fit other XCMG ZL50 series loaders (ZL50G, ZL50C) and LW500KL variants with the same axle architecture – always verify with original part number and axle serial number.

XCMG Side Gear 275102466 – Related Parts Cross‑Reference Table (ZL50GN Series)

Part No.Description / FunctionApplicable Model(s) / Remarks
275102466Side gear (differential side gear, axle shaft drive gear)XCMG ZL50GN drive axle
275102467Side gear (opposite side or alternative fitment)XCMG ZL50GN / ZL50G
275102468Differential pinion gear / spider gear (straight bevel)XCMG ZL50GN differential assembly
275102469Differential cross shaft / spider shaft (pinion shaft)XCMG ZL50GN differential
275102470Differential thrust washer (side gear backing washer)XCMG ZL50GN – sits behind side gear
275102471Differential pinion thrust washerXCMG ZL50GN – between pinion and case
275102472Differential case (left half)XCMG ZL50GN differential housing
275102473Differential case (right half)XCMG ZL50GN differential housing
275102474Differential bearing cone (tapered roller bearing inner)XCMG ZL50GN axle – differential carrier
275102475Differential bearing cup (tapered roller bearing outer)XCMG ZL50GN axle
275102476Axle shaft (left side, splined)XCMG ZL50GN – spline mates with 275102466
275102477Axle shaft (right side, splined)XCMG ZL50GN
275102478Axle shaft seal (hub end)XCMG ZL50GN
275102479Wheel bearing cone (inner, tapered roller)XCMG ZL50GN front/rear hub
275102480Wheel bearing cone (outer, tapered roller)XCMG ZL50GN front/rear hub
253100958Middle transmission shaft (propeller shaft)XCMG ZL50GN driveline
253100955Front transmission shaftXCMG ZL50GN
253100956Rear transmission shaftXCMG ZL50GN
252900594Universal joint cross bearing (spider)XCMG ZL50GN – for transmission shafts
800901160Brake valve (air‑over‑hydraulic)XCMG ZL50GN braking system
803069452Check valve assembly (hydraulic one‑way)XCMG ZL50GN hydraulic circuit
860166494Hydraulic combination switchXCMG ZL50GN (if equipped)
803004342Left lift cylinderXCMG ZL50GN front attachment
803004343Right lift cylinderXCMG ZL50GN front attachment
803596239Condenser assembly (A/C system)XCMG ZL50GN cabin (air conditioning)
860110632Fuel‑water separator combination valveXCMG ZL50GN fuel system
803502420Oil temperature sensorXCMG ZL50GN with Weichai engine
803502505Oil pressure sensorXCMG ZL50GN
803502461Air pressure sensorXCMG ZL50GN (brake system)
250100115Coolant temperature sensorXCMG ZL50GN engine
252908640Parking brake bracketXCMG ZL50GN chassis
805000278Bolt (M10×55, GB/T5783‑2000)XCMG ZL50GN – differential case bolts
805300017Spring washer (10, GB/T97.1‑2002)XCMG ZL50GN – fastener
805004763Bolt (M10×25, Dacromet)XCMG ZL50GN – mounting hardware
803199324Ferrule (Φ14 TJBC)XCMG ZL50GN – front axle oil line
252918385Hose assembly (hydraulic)XCMG ZL50GN – brake / steering circuit
803171569Hydraulic fitting / connectorXCMG ZL50GN
803164726Hydraulic fitting / connectorXCMG ZL50GN – hand brake unit
275102481Differential pinion gear set (complete, 4 pcs)XCMG ZL50GN – alternative kit
275102482Side gear thrust washer set (2 pcs)XCMG ZL50GN – replacement shims
275102483Differential bearing adjusting shim setXCMG ZL50GN – for backlash setting
275102484Axle shaft spacer ringXCMG ZL50GN
275102485Axle shaft retaining ring / circlipXCMG ZL50GN
800511365Spherical plain bearing GE30ESXCMG ZL50GN – standard component reference


Side gear 275102466 XCMG ZL50GNSide gear 275102466 XCMG ZL50GN
Long press to look detail
Copy product links
Long by picture save/share
INQUIRY
CONTACT US MORE+

  • Name*

  • Email* *

  • Leave a message*

  • Submit

    • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content：

You have no items to require

Add Successfully

Related Products

Contact us

WhatsApp:      +86-172 696 29279 

WeChat:          172 6962 9279

E-mail:            asher@wuchenjialianspareparts.com

Tel:                +86-172 696 29279 

Address:          No. 667, Zhujiang Road, Xuejiadao 

                      Street, Huangdao District, Qingdao,

                      Qingdao Area, China (Shandong) Pilot

                      Free Trade Zone

Products

Excavator Parts

Wheel Loader Parts

Bulldozer Parts

Crane Parts

Truck Parts

Engine Parts

Transmission Parts

Road Roller Parts

Grader Parts

Tire

Service

Pre-Sale Consultation

Logistics Services

After-Sale Services

Downloads

Company

About Us

Contact Us

 

Industry

Mining machinery spare parts
Construction machinery spare parts
Port machinery spare parts
Agricultural machinery spare parts

Contact us

WhatsApp:+86-172 696 29279

WeChat:172 6962 9279

E-mail:asher@wuchenjialianspareparts.com

Tel:+86-172 696 29279

Address:No. 667, Zhujiang Road, Xuejiadao 

Street, Huangdao District, Qingdao, Qingdao Area, China (Shandong) Pilot Free Trade Zone

Products

Excavator Parts
Wheel Loader Accessories
Bulldozer Parts
Crane Accessories
Truck Parts
Engine Parts
Transmission Parts
Road Roller Accessories
Grader Accessories
Tire

Service

Pre-Sale Consultation

Logistics Services

After-Sale Services

Downloads

Company

About Us

Contact Us

 

Industry

Mine Applications
Construction
Port Logistics
Agricultural Applications

© Copyright - 2026 Qingdao Wuchen Jialian International Trade Co., Ltd . All Rights Reserved.

© Copyright - 2026 Qingdao Wuchen Jialian International Trade Co., Ltd . All Rights Reserved.

添加微信好友，详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友，详细了解产品
我知道了